 | |||||
| ENGINE PRODUCTS | CASE
# | PART
# | NET
CT. | ||
|
Petron Plus™ PETRON PLUSTM Formula 7 Brake Parts Cleaner is a non-chlorinated product. PETRON PLUSTM Formula 7 Brake Parts instantly cleans and degreases all brake parts, including brake lining, springs, calipers, disc brake pads, cylinders, and drums. Also effective in quieting disc brake squeal. Removes brake fluid, grease, oil, etc., without having to disassemble the brake unit. Leaves no residue and is non-corrosive to metal. PETRON PLUSTM Formula 7 Brake Parts Cleaner contains NO CFCs which deplete the ozone layer. To remove brake fluid, grease, oil and other contaminants, spray brake parts liberally with PETRON PLUSTM Formula 7 Brake Parts Cleaner and allow to run off. Air dry or dry with soft cloth. Repeat application if necessary. Protect rubber, painted and plastic parts from direct spray or overspray. NOTE: Do Not Use on polycarbonate or styrenated plastics. |
 |
10251 |
10250 |
14 oz. | |
| FEATURES:
1. Superior petroleum base stocks and superior additive technology. 2. Compatible with all seal materials, plastics, and paints. 3. Superior antiwear properties. 4. Excellent protection against rust and corrosion. 5. Outstanding oxidation resistance and thermal stability. 6. High flash point and high viscosity index. 7. Long life residue. | |||||
| APPLICATIONS:
| TYPICAL
SPECIFICATIONS: PETRON PLUSTM FORMULA 7 BRAKE PARTS
CLEANER, NON-CHLORINATED Part No., . . . . . . . . . . . 10250 Flash Point, . . . . . . . . . . . N/A Vapor Density (Air =1), . . . . . . . . . . Greater than Solubility in Water % by wt., . . . . . . . . . < than 10% VOC Content % by wt., . . . . . . . . . . 91.3% Vapor Pressure (mmHg or psig @ 70°F), . . . . . . . . 110 psig Specific Gravity (H20 = 1), . . . . . . . . . .73 - .75 Evaporation Rate (Butyl Acetate = 1), . . . . . . . . Faster than Appearance, . . . . . . . . . . . Colorless Odor, . . . . . . . . . . . . Ketone-like | ||||
| PETRON PLUS CARB. & CHOKE CLEANER |
CASE
# | PART
# | NET
CT. | ||
| PETRON PLUS™ PETRON PLUSTM Formula 7 Carburetor and Choke Cleaner is specially formulated to quickly dissolve and remove harmful carbon, gum, and varnish deposits from PCV valves, automatic choke, carburetor and linkage, and distributor. Helps improves fuel efficiency and performance. Other uses included: frees heat risers and brake cleaner. When used as directed will not harm catalytic convertors. Directions for use: Turn engine off and allow to cool. Remove air filter and canister and air filter to expose carburetor. Insert extension tube into the actuator and spray exterior of carburetor, linkage, baffle plates, springs, etc., and let penetrate. Start engine and, at fast idle, spray cleaner into carburetor air intake, revving engine occasionally. Spray vacuum cylinder and piston. To clean choke, spray both ends of choke valve shaft while working choke by hand with engine running. To clean PCV valve, disconnect crankcase side of valve. While engine running, spray into open end of valve while working the plunger back and forth. |
 |
10253 |
10252 |
13 oz.
| |
| FEATURES:
TYPICAL
SPECIFICATIONS: PETRON PLUS™ FORMULA 7 CARBURETOR AND CHOKE CLEANER
| |||||
| APPLICATIONS:
1. Carburetor and Choke cleaner. 2. PCV valve. 3. Heat risers. 4. Automatic chokes. 5. Linkage. 6. Distributors. 7. Brake cleaner. | BENEFITS:
1. No CFCs. 2. Non-ozone deplete. | ||||
| Petron Plus™ 10260 Formula 7 Bug & Tar Remover |
CASE
# | PART
# | NET
CT. | ||
| Petron Plus™ Bug & Tar Remover has a super penetrating formula dissolves and removes bugs, tar, oil, asphalt, grime, road film, tree sap from automobile fenders and chrome. Special formulation prevents run-off and evaporation. For use on automobiles, trucks, motorcycles, chrome wheels, and bumpers. NOTE: On new cars and freshly painted surfaces, pre-test for paint attack in an obscure area of vehicle. Do not use on hot painted surfaces. Avoid prolonged contact with rubber, plastic, and driveway asphalt. Directions: Shake can. Spray Petron Plus Bug & Tar Remover liberally and directly onto dry surface to be cleaned. Let soak for a few minutes. Then wipe away with a clean absorbent cloth that has been presaturated with Bug & Tar Remover. Rinse surface after dirt is removed. Wipe dry with a soft, clean cloth. If stubborn spots remain, repeat procedure. |
 |
10261 |
10260 |
12 oz. | |
| FEATURES:
TYPICAL
SPECIFICATIONS: PETRON PLUS™ FORMULA 7 BUG & TAR REMOVER | |||||
| APPLICATIONS:
1. All Vehicles: a. Auto. b. Marine. c. Farm. d. Power mowers. e. Buses 2. Industrial machinery. 3. Farm equipment. | BENEFITS:
1. Non-Flammable. 2. No CFCs 3. Fast working. | ||||
| GO TO MORE MISCELLANEOUS AUTOMOTIVE LUBES | |||||